Name: 1/4''-3'' Crimping Machine 220V 380V Hydraulic Hose Machine 15 Set Dies
SKU: 190220552012782
Price: 6864.00 USD
Availability: InStock

Product Description

SPECIFICATIONS:

Big force,low noise and easy to operate
Nice look,performance,price
ISO certificate

MODEL	SP60
Max hose ID	φ 6~ 69mm (maximum 3 inch, min 2 min)
Rated voltage	Three-phase AC380V or single-phase AC220V
Random supporting mold	15 set (14, 16, 20, 22, 26, 30, 34, 38, 46, 51, 54, 64, 69) STD
Weight	330 Kg
Dimensions	870(L)x680(W)x1380 (H)mm

Direction for use

使用说明

1. When crimping, place the fitiing in the center of the mold as much as possible, and do not press on the hexagonal nut. 2. Prevent tools and other foreign objects from entering the press head. 3. Every time after the work is completed, the eight mold bases must be opened to the maximum extent, so that the spring can be in an open state and the spring can be maintained, and the oil cylinder is also in a pressure relief state to extend the life of the oil seal.

Description of application effect:

1. When using the tube press for the first time, it should be crimped 20-30 times without load, and it can be used after observing that all parts are normal.

2. When using the pipe press in winter, it should be withheld 20-30 times without load to increase the oil temperature.

3. Press the open button, after the mold base is opened, select the corresponding mold to install on the mold base according to the specifications of the hose to be crimped, and adjust the micrometer scale.

4. Place the hose with the joint in the proper position in the press head so that the entire length is crimped at one time.

5. Press the crimp button to execute the crimping operation until the crimping head stops crimping and automatically opens the mold.

6. Take out the crimped hose assembly, use a vernier caliper to check the outer diameter of the crimped joint jacket. If it does not match the parameter table, fine-tune the micrometer scale until the next hose crimp meets the requirements.